C zonke-in-enye servo drive ombane ukutshintsha umqulu ukwenza umatshini kunye umatshini ukupakisha oluzenzekelayo Featured Image

C yonke-in-one i-servo drive yombane yokutshintsha umatshini wokwenza umqulu kunye nomatshini wokupakisha ozenzekelayo

1, Ubalulo lwemveliso: nayiphi na inguqu phakathi

2,① C ububanzi (50-160mm)

3, ② ubude (30-60mm);

4,③ edge encinci (10-20mm);

5, ④ ubukhulu t (1.0-3.0mm) adjustable

6 、 Isantya sokuvelisa: 30 m / ngomzuzu (ngokwenani lokubetha)

7, Materials esebenzayo: Q195, Q235, Q355 eshushu rolling strip steel okanye hot rolled galvanized strip steel (1.0-3.0mm)

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

I-Hydraulic Decoiler

1, Umthwalo: iitoni ezi-6
2, Bamba indlela: isikhululo samanzi
3, iBrake: intambo yokusonta ibanjwe ngokuqinileyo

I-lever kunye neyunithi yomngxuma wokugqobhoza

I-Lever 1 iseti

I-1.i-3 ephezulu ye-roller kunye ne-4 ye-roller ephantsi + i-roller ezimbini ezihamba phambili

2.i-shaft epheleleyo eqinileyo yokulungiswa konyango lobushushu kunye ne-polish plating.

Iyunithi yomngxuma wokugqobhoza iiseti ezi-3

1.umngxuma omnye + umngxuma kabini,

2.umngxuma ongqukuva Φ 14mm

3.umngxuma ombhoxo 26* 14mm.

Servo drive automatic rollUkubumbaumatshini

1, Izinto zokutyisa: i-shaft yesikhokelo + ivili lesikhokelo.

4, Ixhotyiswe ngamaqela ali-13 eemodyuli zokutshintsha kwe-CZ, jikelisa i-180 degrees ukugqiba ukutshintsha, ngokusebenzisa

5, Iqhosha lamandla lokutshintsha ubungakanani benkcazo yobungakanani.

6, Ukomelezwa koxinzelelo: ithoni yegama elinye elithe tye.

7, Ngokuthe tye: umqulu ezilishumi CZ ezizodwa ezimbini axial ngqo + ezine roll ezimbini axial ngqo, iyonke iiyunithi ezimbini ngqo.

I-8, iNkokeli: ngokugqithiswa, i-shaft gear ephezulu kunye nesezantsi.

9, Punch: emva kokwenza umngxuma omnye + umngxuma kabini, umngxuma round Φ 14mm kunye umngxuma oval 26 * 14mm.

10, Indlela yokuqhuba

11, 22KW servo motor drive + Shanghai Nanrui reducer (Changzhou Xintao reducer)

12, Umqulu: Izinto eziphathekayo: GCr 15

I-13, itekhnoloji yokucubungula: inkqubo yolawulo lwamanani emva konyango lobushushu ukuya kwi-HRC 58-60, i-electroplating yemoto entle

14, Shaft: Izinto eziphathekayo: 40 Cr

I-15, itekhnoloji yokucubungula: I-CNC yokumodareyitha i-HRC 28-12, emva koko iphuculwe i-CNC yokugulisa i-electroplating

Ciyunithi

Iseti enye iblade yokusika ukusika ubungakanani be80-300

Inkqubo yolawulo lombane

1, Ikhabhathi yolawulo oluphambili: 1

2, Imo yokutshintsha: (umbane) utshintsho, (iimoto ezintathu zokutshintsha: 0.75 * 3kw)

3, Ukutshintsha ububanzi bekhabhathi: 1 (ifakwe phakathi kwesakhelo)

I-4, isilawuli sangaphandle: i-1 (elula ukulawula phambili nasemva ngexesha lemveliso kunye nokulungiswa kweempazamo)

I-5, imvelaphi yezixhobo eziphambili: i-PLC (i-Omron, i-Japan), i-drive (i-Inwitten), i-brake resistance (i-Inwitten), isikrini sokuchukumisa (i-imeyile), i-relay (i-Omron, i-Japan), i-proximity switch (South Korea), i-encoder ubude (i-Omron, i-Japan )